All cases should be case mouth deburred after trimming and neck turning. Tools are double-ended with standard 45-degree flutes that debur/chamfer the inside and outside mouth of the case. They will work on cases from .17 to .45 caliber. Precision ground flutes.
Part Number: DBT-REG
Get nice clean cuts on your case mouths with our super sharp case mouth deburring tool
Handheld tool with optional power adaptor
Years of use
Precision ground flutes
Made in the USA
L.E. Wilson
All cases should be case mouth deburred after trimming and neck turning. Use the power adaptor with …
Lyman
Bevels and removes burrs from both inside and outside of case mouth. Precision machined and hardened…
Forster Products
For reloading enthusiasts Forster is known for quality as with the Forster Deburring Tool. This is a…
L.E. Wilson
The Wilson Pistol Max (Cartridge) Gage is designed to check loaded pistol cartridges and is set to m…
L.E. Wilson
The case holder holds the case for trimming. Cases are held by body taper NOT case head. Diameter of…
